Skip to content

Dominion 2L Imidacloprid – Termiticide | Insecticide

$52.00

Dominion 2L LabelClick here”  MSDS

Dominion 2L, a 21.4% imidacloprid termiticide/insecticide, is now more flexible with the added EP/IST termite
treatment options. Dominion 2L creates a barrier that termites, ants, and other pests cannot detect. As a result,
pests unknowingly come into direct contact with the imidacloprid application.

Active Ingredients
Imidacloprid 21.4%

APPLICATION AS A TERMITICIDE
DOMINION 2L may be used in and along the outside perimeter of structures and building construction to prevent and control termite infestations.
USE INSTRUCTIONS
For subterranean termite control, specific treatment instructions may differ due to regulations, treatment procedures, soil types, construction practices and other factors. The purpose of chemical soil treatment for termite control is to establish a continuous chemical treated zone (horizontal and/or vertical) between the wood and other cellulose material in the structure and the termite colonies in the soil. Follow all federal, state, and local regulations and treatment standards for protection of a structure from termites. The establishment of an aerial or above ground colony may require additional treatments to control the termites, as well as landscape modifications, and/or structural repairs to deny termites of a moisture source. Use a 0.05% to 0.1% dilution based on current practices. For a typical control situation, a 0.05% dilution is used. A 0.1% dilution may be
used when a severe or persistent infestation exists.

When treating adjacent to an existing structure, the applicator must check the area to be treated, and immediately adjacent areas of the structure, for visible and accessible cracks and holes to prevent any leaks or significant exposures to persons occupying the structure. People present or residing in the structure during application must be advised to remove their pets and themselves from the structure if they see any signs of leakage. After application, the applicator is required to check for leaks. All leaks resulting in the deposition of termiticide in locations other than those prescribed on this label must be cleaned up prior to leaving the application site. Do not allow people or pets to contact contaminated areas or to reoccupy contaminated areas of the structure until the cleanup is completed. Structures that contain wells or cisterns within the foundation of the structure can only be treated using the treated backfill method described in the treatment around wells and cisterns section of this label. Consult state and local specifications for recommended distances of wells from treated area, or if such regulations do not exist, refer to Federal Housing Administration
Specifications (H.U.D.) for guidance.

MIXING: Refer to MIXING TABLE for correct amount of DOMINION 2L to be used.
Follow this procedure for mixing the termiticide dilution:
1. Fill tank to 1/3 full.
2. If using large sprayer, start pump to begin bypass agitation and place end of treating tool in tank to allow circulation through hose.

Effective Against: termites, ants, beetles, billbugs, chinch bugs, mole crickets
Use Sites: pre- and post-construction, turf, and ornamentals

Features & Benefits
• Prevents and controls subterranean termites, drywood termites, dampwood termites, carpenter ants and
other wood-infesting insects
• Labeled for pre-and post-construction as well as turf and ornamentals
• Contains two pounds of imidacloprid per gallon

Weight 1.5 lbs

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.

Optimized by Optimole